Auto LCR Meter Tester 10KHz Digital Bridge Resistor inductance capacitance test

Description

Frequency 0 Hz (DC) 100 Hz 120 Hz 1000 Hz 10 kHz Error ± 100 ppm
Voltage 0 Hz (DC): 0.56 V ± 5% AC AC RMS: 100 mV 300 mV 600 mV ± 5%
Internal resistance AC DC Constant 100Ω ± 5%
Basic Accuracy
Z / R / L / C: ± reading × 0.2%
Θ: 100 Hz 120 Hz 1 KHz & lt; 0.005 ° 10 KHz & lt; 0.05 °
See the user manual for a detailed description
Display range
Four significant figures, decimal 0000--9999.
Impedance / resistance: 0.1mΩ-999.9MΩ (the minimum resolution is only 0.1mΩ, 100mΩ the following three significant figures)
Inductance / Capacitance: 0.000uH - 999.9KH 0.000P - 999.9mF
Quality factor / loss factor: Q: 0.0000 --- 99999 D: 0.0000 --- 99999
Impedance angle θ: -179.99 ° --- 0.0000 --- + 180.00 °
Display parameters
Window 43 × 29 mm Effective display area 37 × 23 mm
LCD128 × 64 automatic backlight
The update frequency is 3.75Hz
Measurement method
Automatic range control
Body clip clip socket: direct four-wire mode
External test line: external four-wire or two-wire mode
Measurement results display and model
Resistance, inductance, capacitance, Q value, D value, phase angle
Ls (Cs) -Rs-Q model, Lp (Cp) -Rp-D model, Z-theta model
measure time
Since the measured components from the start, the main parameters of about 1 second secondary parameters ≥ 1 second
Power supply and charging
Built-in 3.7V / 450mAH lithium polymer rechargeable battery
Single-button press the switch machine
Undervoltage automatic shutdown 3.55V ± 0.05 V
Charging power DC5V, Ф3.5mm inside and outside core plug, inside + outside -
Charging time of about 1.5H - 2.0H cumulative use of time ≮ 8 hours
Power consumption
Maximum operating current of 27mA (dark ambient backlight automatically adjust the brightest, non-test state)
Basic operating current 23mA (bright environment backlight automatically adjusts the darkest, non-test state)
Power off state consumption <1uA
Automatic shutdown time
15 ± 2 minutes, automatic shutdown time to remind the pre-1 minute
Short press the power switch to maintain power on, automatic shutdown timer to time. See the user manual for details
size and weight:
103 × 69 × 24 mm
180g
Package include:
1 x Digital Bridge LCR Metetr Resistor Inductance Capacitance Tester
2 x Kelvin Clip
2 x Test Leads
Shipping
Item will be shipped out within 2 business days after receipt of your payment, we ship the item through hongkong Air mail or China Post.          We Ship to Worldwide, but Italy, Nigeria, Brazil will take long delivery time .
Before buying, Please make sure your address is correct. Or not, please correct it before payment
Ship to worldwide from Hong Kong within 12-24 hours after payment completed received, and will give you the tracking number asap. sometimes we will send it by flat post air mail if just one low price order.Hope you understand.
we advise shipping by DHL or EMS,and we have gave a discount for you,you can received it in 4-9 business days.
it takes about 15-30days usually if shipping by CHina/Hong Kong post air mail
Payment
We ONLY accept payment by Paypal.
All payments must be received within 7 working days after auction has ended. Non-paying bidders will be reported to ebay.
Feedback
If you have any questions or comments about our products or policies, please contact us by emails with your purchased item number.
You also can contact us by leaving us an eBay message,we will be responded within 24hours.
Customer satisfactory is most important to us. If you have a problem or question regarding your transaction please contact us before leaving any type of feedback.
Negative feedback does not solve anything. We are always willing to work things out, thank you!
Return Policy
Refunds are only offered for defective products reported within 7 days upon receipt
Buyers need to return the defective item for the replacement at his own cost. Item must be returned by registered airmail to our requested address.
We do our best to serve each and every customer the best we can.
if you need more items,we can provide you a wholesales price,you can contact us by message or email.