C-T7-H high precision transistor tester 1.8 inches Capacitance Meter + Cable Kit

Description

Home
Arduino
Module
Sensor
Chips
About Us
TC-T7-H
Features
:
1. Automatic detection of zener diode 0.01-20V.
2. Self-test with automatic calibration.
3. Support infrared coding.
4. Infrared waveform display.
5. Infrared receiving instructions.
6. The measurement results are displayed by TFT graphic.
7. A key operation.
8. Automatic shutdown (timeout setting).
9. Built-in high capacity rechargeable lithium ion battery.
10. Lithium ion battery voltage detection.
Specification
:
Condition:100% Brand New
Color: As Pictures Shown
Capacitor: 25pF-100mF
Resistor: 0.01-50MΩ
Inductor: 0.01mH-20H
Battery: 0.1-4.5V
Package list:
1 x Transistor tester
1 x USB cable.
1 x Red and yellow green contact wires
2 x capacitance
LCR-T7
Description:
- 160x128 TFT display
- Multi function key
- Transistor test area
- Zener Diode test area
- IR receiver window
- Micro USB Charging Interface
- Charge indicator LED
Features:
TFT graphic display Multifunction Tester.
Transistor Tester
- Automatic detection of zener diode 0.01-30V
- Self test with automatic calibration
IR decoder
- Support Hitachi IR coding
- IR waveform display
- Infrared receiving instruction
Other
- Measure results using TFT graphic display (160x128)
- a key operation
- Automatic shut-off (Settable Timeout)
-built-in High-capacity rechargeable Li-Ion battery
- Detection of the voltage of the Li-ion-160x128 tft battery
- Transistor test area
- Zener diode test area
- IR receiver window
- Micro USB Charging Interface
- LED charge indicator
- Chinese and English support
Warning: Built-in Li-ion Battery, it is strictly prohibited the tester immersed in water, or near a heat source!
Warning: For your personal safety, please strictly comply with the use of Li-ion Battery specifications and precautions!
Operating Instructions
1.1 Key operational definitions
Multi-function key has two actions:
l Short press: Press the key and not less than 10 ms, release key within 1.5 seconds
l Long press: Press the key more than 1.5 seconds
1.2 Power on
In the power off state, short press the multifunction key, the tester is turned on and automatically measured.
l Power on & measurement interface
1.3 Detect transistor
In the power off state or the test is completed, put the test element into the transistor test area of test seat, and press the locking handle, short press the multifunction key, the tester automatically measure, graphical display of measurement results when testing is complete.
Warning: Always be sure to DISCHARGE capacitors before connecting them to the tester! The tester may be damaged before you have switched it on!
Warning: We do not recommend using the tester to measure the battery! The battery voltage must be less than 4.5V, otherwise the tester may be damaged!
l Component placement
Test seat are divided into transistors and zener diode test area, detailed in 1.1 Description.
l No, unknown, or damaged part
Package Included:
1 Set  LCR-T7 TFT Transistor Tester
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
Fill your shipping info
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.