-40%
CNC Dual Channel DDS Arbitrary Waveform Signal Generator Pulse Frequency Meter
$ 61.49
- Description
- Size Guide
Description
无标题文档Title：
CNC Dual Channel DDS Function Arbitrary Waveform Signal Generator Pulse Signal Source Frequency Meter
Sine Wave Frequency Range:
0~60MHz
Frequency Range:
0~25MHz
Pulse Wave Frequency Range:
0~6MHz
Pulse Width Adjustment Range:
25ns-4000s
Square Wave Rise Time:
≤10ns
Frequency Accuracy:
±20ppm
Frequency Stability:
±1ppm/3h
Waveform Length:
2048 Points
Waveform Sampling Rate:
266MSa/s
Vertical Waveform Resolution:
14 bits
Amplitude Resolution:
1mV
Amplitude Stability:
±0.5%/5h
Offset Resolution:
0.1V
Phase Adjustment Range:
0~359.9°
Phase Resolution:
0.1°
Low Level:
<0.3V
Level Rise/Fall Time:
≤20ns
High Level:
1V-10V
Counting Range:
0-4294967295
Coupling Mode:
DC And AC Coupling
Counting Method:
Manual
Input Signal Voltage Range:
2Vpp~20Vpp
Sweep Channel:
CH1 or CH2
Sweep Time:
0.1s~999.9s
Number Of Pulses:
1-148875
Display Type:
2.4 Inch TFT Color LCD
Voltage Range:
DC5V±0.5V
Product Size:
156*96*56mm
Product Weight:
408g
Packing Size:
24*14*9.5mm
Minimum Frequency Resolution:
0.01μHz (0.00000001)
Waveform Characteristics:
Waveform Types: sine wave, square wave, pulse wave, triangle wave, partial sine wave, CMOS wave, DC level, half wave, full wave, forward ladder wave, reverse staircase wave, noise wave, exponential rise, exponential drop, multi-sound wave, Sinck Pulse, Lorentz Pulse, and 60 user-defined waveforms.
Harmonic Suppression:
≥45dbc (<1MHz); ≥40dbc (<1MHz~20MHz)
Total Harmonic Distortion:
<0.8% (20Hz~20kHz, 0dBm)
Square Wave And Pulse Wave Overshoot:
≤5%
Pulse Wave Duty Cycle Adjustment Range:
0.1%~99.9%
Sinusoidal Duty Cycle Adjustment Range:
0.1%~99.9%
Sawtooth Linearity:
≥98% (0.01Hz~10KHz)
Sine Wave Amplitude Range:
30MHZ, 2mVpp~5Vpp
Square Wave/Triangle Wave Amplitude Range:
10MHz≤frequency≤25MHz, 2mVPP~5Vpp
Amplitude Flatness:
± 5% (<10MHz); ± 10% (<10MHz);
Output Impedance:
50Ω ± 10% (typical)
Protection:
All Signal Outputs Can Work Within 60 Of The Load Short Circuit
Offset Adjustment Range:
0
