L. E. Wilson Trimmer Case Holder - 223 Rem. (17 &222) All Cases (See Inside)

Description

From L.E. Wilson Web Site (Photos are for reference only)
The case holder holds the case for trimming, primer pocket reaming, neck reaming and deburring with our Uniform Deburring Tool.
Depending on the caliber we may only need to make one Case Holder.  But in some calibers we have to make a separate case holder sized and non-sized brass.  So if you are full length sizing 308 Win Brass you will need a NEW Case Holder.  But if you are neck sizing only 308 Win Brass, this does not change body diameters, so you will need a FIRED Case Holder.
On the other hand for the 223 Rem we only make one case holder.  That is what we now call a STANDARD Holder.  This will work for full length, neck sized or new brass.
Fired Case Holders
= Neck Sized only or if you are forming wildcat calibers and want to trim non-full length sized brass
New Case Holders
=  Full length sized cases or New factory brass
Standard Case Holders
=  These will work for all cases New or Fired
The photo of the trimmer case holder is just for reference only.  The holder listed will be the one shipped.