LCR Meter Frequency Points Bridge Impedance Tester Digital Screen Hand Portable

Description

LCR Meter Frequency Points Bridge Impedance Tester Digital Screen Hand Portable
Specification:
Main material: metal
Working frequency: 50Hz~100kHz
Display screen: 2.4 inch TFT resolution 320*240 (QVGA)
Battery: 1 * lithium battery, 2000mAh (included)
Power consumption: <1W
Charging current: 400mA
Charging interface: USB (only as a charging interface)
Automatic shut-down: always open, close immediately, 5 minutes to 60 minutes (optional)
Measurement parameters: Rs/Xs/Rp/Xp/Cs/Cp/Ls/Lp/Z/D/Q/θ/Vrms/Irms
Display resolution: 6 effective value
Measurement accuracy: less than 0.1% within the measurement range, out of range may be greater than 0.1%
Connector: BNC
Display range:
Z, R, X: 0.00001mΩ~9999999MΩ
C: 0.00001pF~9999999F
L: 0.00001nH~9999999H
D, Q: 0.001~99999
θ(degree): -179.9~179.9
Vrms: 0.0001mV~999999mV
Irms: 0.0001nA~999999mA
Measuring range:
Z: 1mΩ~200MΩ
C: 3fF~3F
L: 0.5nH~600kH
Features:
The test frequency range is wide, the frequency range: 50Hz~100kHz. The frequency can be set.
Small size, light weight, easy to carry, you can take it to anywhere you want.
Built-in battery, using 2000mAH polymer lithium battery, continuous working time exceeds 4 hours.
The resolution is high, and the measurement result is 6 significant figures.
With calibration function, accurate measurement, high cost performance.
The serial/parallel mode, level and internal resistance are optional.
Strong anti-power frequency interference, and the interference level prompts.
Automatic gear shift without manual intervention.
Packing List:
1 * LCR Meter
1 * USB Cable