NanoVNA-F Vector Antenna Network Analyzer 50KHz-1000MHz 4.3" Screen

Description

NanoVNA-F 4.3" LCD Display 50KHz-1000MHz HF VHF UHF VNA Vector Network Analyzer
N
ote:
if you don't kno
w how to use it or have any problem during usage, please feel free to contact us vis ebay message, we will try our best to solve the problem for you ASAP.
Description
NanoVNA-F Mini Vect
or Network Analyser is a product based on the Open Source Project of NanoVNA. The RF part is consistent with the original version (NanoVNA-F uses harmonic spread measurement frequency to 1 GHz).
NanoVNA-F hardware functi
ons include and are not limited to the following improvement
s
:
1. Use 4.
3-inch IPS TFT LCD screen, with a larger view angle and can be seen clearly in strong outdoor light.
2. Switch to large capacity 5000mAh lithium battery, standby time is longer, and expand a USB interface. Usually, it can be used as a rechargeable treasure when the instrument is not used.
3. The IC is charged by high current 2A, and the charging time is shorter.
4. Change to larger and better operating wave wheel.
5. Switch to a power switch with a greater sense of operation and a better sense of operation.
6. Support Chinese and English menu switching;
7. Upgrade the user program by virtual U disk.
8. Standard aluminium shell to protect SMA head and reduce the interference of external electromagnetic wave to instrument.
NanoVNA-F measurement range is
50k-1GHz.
The harmonic spread measurement frequency of the output signal of the clock chip SI5351 is 1000MHz. At 600M-1GHz, the dynamic range of S11 is 40dB (standing wave ratio is less than 1.02).
At the same time, a metal shield is designed for the RF front-end, so that the dynamic range of S21 is better than 60dB in the whole frequency band.
Specification:
Size: 14CM * 7.5CM * 2CM (length, width and height)
Measuring Frequency: 50kHz ~ 1000MHz
RF output: - 13 DBM (maximum - 9 dbm)
Frequency accuracy: < 0.5 ppm
Port SWR: < 1.1
Display: 4.3 inch IPS TFT (800x480)
USB Interface: USB Type-C Communication Mode: CDC (Serial)
Power consumption: USB 5V 200mA, built-in 5000mAh battery, theoretical life of 18 hours, maximum charging current 2A
Output capability: 5V/1A, supporting Android and Apple phones
Number of calibration points: 101
Number of scanning points: 101
Display Tracking: 4, Mark: 4, Settings Save: 5
Scanning time: about 1.9s/time (50kHz-1000MHz full frequency band)
Measurable S parameters, voltage standing wave ratio SWR, phase diagram, group delay, Smith circle diagram... ;
19.0Wh (about 5000mAh after conversion) large capacity lithium battery